help with a suggestion for a cam choice 426 Hemi

Print Thread

help with a suggestion for a cam choice 426 Hemi #1108947 11/07/11 08:30 PM 11/07/11 08:30 PM
Joined: Jan 2003 Posts: 5,044 At a gas station near you B badblack68 OP master
badblack68 OP master B Joined: Jan 2003 Posts: 5,044 At a gas station near you	I`m looking for suggestion for a cam choice in my 426 Hemi. The engine is going into a 67 GTX with a 727 auto, dana 60 with 3:54 gears. The rear tire is 28" in diameter. I want a cam with a little more than what the engine came with in stock form. The engine has a measured 10.25:1 compression ratio. I want suggestions for a good hydraulic cam. Thanks! Nobody gets in to see the wizard! Ain`t no way! Ain`t no how!

Re: help with a suggestion for a cam choice 426 Hemi [Re: badblack68] #1108948 11/07/11 09:32 PM 11/07/11 09:32 PM
Joined: May 2004 Posts: 12,384 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,384 Taxes & Virus's R-US, NY	Well it cam stock with a 484 cam, but I would suggest a mild solid cam. Same cost, more performance, and less issues. We have been running a cam in the .575" range with mild duration, and gone as fast as 11.1 with it in a street car. the .484 has about 244* duration at 50 and we kept ours similar at 248/252, but with just awesome performance... http://www.hughesengines.com/Index/produ...mp;partid=21819 '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Hop To