Quote:

---

Quote:

---

Great job, can you share how you achieved the slop look with the seam sealer?

Thanks

---

Just urethane sealer, I bought those tubes that you have to apply with an aplicator gun. I cut the tip the biggest I could, and really applied it on REAL THICK. Then I just bought a brush and cut it in small pieces (as big as a barbers brush) and I brushed and spread the sealer. Its better to use a brush that has stiff bristles.

The key hear is to do it fast and not overdo it, you want to brush and push the sealer right in the middle to make the sealer get into the seam and leave the edges of the sealer just spread out so the spread and habve a "round" oozed off look on the sides. You want to brush just once, max twice and be done with it.

---

Thanks for the info, I'm doing a 71RR V code right now, and I'm at that point of applying the sealer.

Norm

Quote:

---

Quote:

---

Quote:

---

Great job, can you share how you achieved the slop look with the seam sealer?

Thanks

---

Just urethane sealer, I bought those tubes that you have to apply with an aplicator gun. I cut the tip the biggest I could, and really applied it on REAL THICK. Then I just bought a brush and cut it in small pieces (as big as a barbers brush) and I brushed and spread the sealer. Its better to use a brush that has stiff bristles.

The key hear is to do it fast and not overdo it, you want to brush and push the sealer right in the middle to make the sealer get into the seam and leave the edges of the sealer just spread out so the spread and habve a "round" oozed off look on the sides. You want to brush just once, max twice and be done with it.

---

Thanks for the info, I'm doing a 71RR V code right now, and I'm at that point of applying the sealer.

Norm

---

Quote:

---

Underside....


Actually it's 2 stage paint mixed to match the dip primer grey (thanks Rick Kreuziger for sending me color match samples of the primers!!! ). Then we dusted the f8 paint in the overspray patterns and then we got all clearcoated with matte Glassurit clear!!!

Looks good, hard to tell its not primer, and it should provide years of protection and it will be super easy to wipe clean if stained!!!

---

Looks fantastic.. That's pretty much the exact thing I did to my former '68 Hemi Charger R/T..

Quote:

---

Domingo, unreal. Looks unbelievable. You really are an artist. Make sure you leave some marijuana joints and your initials all over before the carpet install.. Oh ya, leave some wrong build sheets to make it official..


Kiddding. Looks amazing. Great work.

---