Re: wheelstand video
[Re: hvyweight]
#1089102
10/06/11 07:18 PM
10/06/11 07:18 PM
|
Joined: Sep 2011
Posts: 369 California, USA!!!
WheelsUp73
enthusiast
|
enthusiast
Joined: Sep 2011
Posts: 369
California, USA!!!
|
Quote:
I am going to go through the front end this winter. Maybe get some tubular uppers to get more caster in it!
We just rebulit the frontend on my Dart. Boxed in the lower arms and tightened the t-bar mounts and installed nylon bushings, We installed Reilly Motorsports Tubelar upper arms and their solid strut rods and Firmfeel lower control arm greasable pins. We upgraded the tie rods to 11/16 and installed PST adjusting sleeves.The caster is at 6 degrees now.The camber only moves 1/2 degree throughout the whole suspension travel and the toe only moves 1/4 inch throughout the whole suspension travel. Car drives awesome now!
|
|
|
Re: wheelstand video
[Re: 11secondC]
#1089105
10/07/11 06:45 AM
10/07/11 06:45 AM
|
Joined: Jan 2003
Posts: 2,933 A shed in England
Tig
master
|
master
Joined: Jan 2003
Posts: 2,933
A shed in England
|
Nice wheelie. I wouldn't worry to much about the touch down wobble. Seems to be a mopar thing.
'74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 3:73's and real 10.5 radials. 9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with our old mule KB, 572-13, 580 wedge. RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03
|
|
|
Re: wheelstand video
[Re: Tig]
#1089106
10/07/11 08:41 AM
10/07/11 08:41 AM
|
Joined: Jan 2003
Posts: 13,385 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,385
Marion, South Carolina [><]
|
Quote:
Nice wheelie. I wouldn't worry to much about the touch down wobble. Seems to be a mopar thing.
Mine does the same thing.
I figured you would be getting another converter, but just curious. I'm on the fence about spraying my car b/c I don't want to change converters and then have it run like crap on motor. It'd be nice to find a happy medium where it wouldn't kill it on motor, but still pick up on spray. I'm only talking a small hit, like 200 or so.
I'd really like to see an 8 sec timeslip, but I have all sorts of reasons not to spray my cuda.
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
Re: wheelstand video
[Re: an8sec70cuda]
#1089107
10/07/11 10:31 AM
10/07/11 10:31 AM
|
Joined: Jan 2004
Posts: 903 Saskatchewan, Canada
cudabin
super stock
|
super stock
Joined: Jan 2004
Posts: 903
Saskatchewan, Canada
|
Hey Mike, Great video! The car makes some real torque, and launches hard. What was the 60 foot? Looks like I need to bring the Cuda back to Gimli and line up with you Cheers, Arnie
67 Cuda 8.48@ 158.7 mph 1.18 60' 2,600 DA(so far...)
70 Super Bee 440 Six Pack 4-speed. 13.2 @ 104 Stock exhaust/Street tires.
|
|
|
Re: wheelstand video
[Re: cudabin]
#1089108
10/07/11 10:45 AM
10/07/11 10:45 AM
|
Joined: Jan 2004
Posts: 550 Ma
Voluster
mopar
|
mopar
Joined: Jan 2004
Posts: 550
Ma
|
|
|
|
Re: wheelstand video
[Re: PC-CHARGER]
#1089111
10/07/11 01:52 PM
10/07/11 01:52 PM
|
Joined: Jul 2005
Posts: 1,301 Penna
70satelliteguy
pro stock
|
pro stock
Joined: Jul 2005
Posts: 1,301
Penna
|
"We'll have to find some better ballast because I'm done laying in the trunk for those passes!!! " How much ballast weight does it take to do wheelstands like that PC ??? And how do you pass Tech ? p.s. We used to do that WAY BACK as a kid trying to get into the Drive in for free.
|
|
|
Re: wheelstand video
[Re: 70satelliteguy]
#1089112
10/07/11 02:32 PM
10/07/11 02:32 PM
|
Joined: Mar 2007
Posts: 314 Manitoba, Canada
Big Wedge
enthusiast
|
enthusiast
Joined: Mar 2007
Posts: 314
Manitoba, Canada
|
Quote:
"We'll have to find some better ballast because I'm done laying in the trunk for those passes!!! "
How much ballast weight does it take to do wheelstands like that PC ??? And how do you pass Tech ?
p.s. We used to do that WAY BACK as a kid trying to get into the Drive in for free.
Tech is easy, we stuff him in there after....
Garth
|
|
|
Re: wheelstand video
[Re: cudabin]
#1089114
10/07/11 06:30 PM
10/07/11 06:30 PM
|
Joined: Feb 2010
Posts: 190 Winterpeg, Canada
hvyweight
OP
member
|
OP
member
Joined: Feb 2010
Posts: 190
Winterpeg, Canada
|
Quote:
Hey Mike,
Great video! The car makes some real torque, and launches hard.
What was the 60 foot?
Looks like I need to bring the Cuda back to Gimli and line up with you
I had a bunch of 1.32s when the front stayed down. On the back tires 1.41s
ya bring here down. How's the motor working out for you?
Cheers,
Arnie
|
|
|
Re: wheelstand video
[Re: PC-CHARGER]
#1089115
10/07/11 06:33 PM
10/07/11 06:33 PM
|
Joined: Feb 2010
Posts: 190 Winterpeg, Canada
hvyweight
OP
member
|
OP
member
Joined: Feb 2010
Posts: 190
Winterpeg, Canada
|
Quote:
Amazing what a little ballast and shock adjustments will do. Previous to these huge wheelstands, the car was just tearing the tires off. Hey Mike. We'll have to find some better ballast because I'm done laying in the trunk for those passes!!!
What Rickster are you scared.....oh well back to the drawing board! LOL!
|
|
|
Re: wheelstand video
[Re: hvyweight]
#1089119
10/07/11 09:06 PM
10/07/11 09:06 PM
|
Joined: Jan 2004
Posts: 903 Saskatchewan, Canada
cudabin
super stock
|
super stock
Joined: Jan 2004
Posts: 903
Saskatchewan, Canada
|
Quote:
Quote:
Hey Mike,
Great video! The car makes some real torque, and launches hard.
What was the 60 foot?
Looks like I need to bring the Cuda back to Gimli and line up with you
I had a bunch of 1.32s when the front stayed down. On the back tires 1.41s
ya bring here down. How's the motor working out for you?
Cheers,
Arnie
Mike, it ran an 8.89 at 4,600 feet DA, but there is lot's more in it. had more tranny issues, then dropped a valve, but I am changing over to titanium intakes and see what happens next year...
How is the track at Gimli, still one bad lane??
Cheers,
Arnie
67 Cuda 8.48@ 158.7 mph 1.18 60' 2,600 DA(so far...)
70 Super Bee 440 Six Pack 4-speed. 13.2 @ 104 Stock exhaust/Street tires.
|
|
|
|
|