Probably heard this a hundred times but here it is again...where to get a set of headers to fit the big block mopar. I dont want to make my own. I have stage six mopar heads. thank you!

I don't think there is an "off the shelf" set one can buy.

I've seen some that use a shorty header and mount the turbo to the engine on a plate. The header& pipe don't support the turbo, just feed it.

Ain't happening. Not even a smallblock! Most are using stock mannies flipped. I had to build mine from the Jegster Header kit and ebag flanges and mandrel bends. There is ONE company making a complete twin kit for B and RB. It is Pricey!

Who is it that makes the header kit? Everything seems pricey nowadays anyway.

This the complete kit,
http://www.moparturbokits.com/

Looks alot like my passenger side header but my driverside is a log style. This kit has a waaay smaller turbo though! I had to get a 5" dp out.

Sorry! I noticed that this was for a smallblock. I guess there is no "Kit" per-say for bigblocks.
I spent $119 for the header kit from Jegs and found the flanges on ebay for around $50. Then I purchased the two 3" mandrel bend assortment kits from ebay as well for $70 per kit.

Which body is the engine in? I have a set I made for a 440 in an A body that I'd be willing to sell. I'm runing an Hemi now and don't have much use for them. The wastegate flange is for a Turbonetics Racegate. They're for a single turbo with T6 flange. They fit pretty well in an A-body but would work great in anything bigger (B or E). I have the turbo I'd sell also. It an 85 MM TV8101. Let me know.

It's in a e body with no fender aprons

I would like to see what your headers look like mocked up even for reference sake as a single turbo.

Here are mine we built.

Not to steal the thread, but this is my low deck in an a-body with the a 106mm, stock inner fenderwells, 2" pri into 3" crossover in to the t6 flange

What size engine do you have. Wondering what kind of turbo I should use on my 500. I like your setup with the single. I am shooting for 8.5's which what would be allowed with the cage I have.

if your looking to do it on a budget, get a standard 106mm, which is what i started with on my 500" lowdeck it made good power

Car went 8.90s leaving on no and rolling to about 10lbs of boost by the end of the run.

We built our headers, so if you need help let me know

Is there a budget 106mm available ro recommended. Always on a budget!

yellowbullet.com/forum

look in the for sale section

Race stuff! Wife will be mad!