Quote:

Quote:

just measured a 360 truck pan. it measures 4 1/4" in the front and a tick less than 9" in the rear [tallest part of the sump]. a 318 pan should be similar, as the only difference i am aware of is the main saddle diameter is bigger on the 360.




The rear seal area on a 360 is smaller than on a 318.

The front of the 360 and both ends of the 318 pan are the same.

A pan off of a V-8 Dakota has different overall measurements. Not sure of the seal configuration on Magnum engines.


sorry on the mis-information. i knew one was larger, but i forgot which one it was. "oldtimers" ya know.........