Quote:
just need to get on the right path and get it done.
Assuming stock discs/drums. get an iron M/C of the right bore (not sure but not 1&1/8", iirc 7/8" or 1") or an alum M/C from Doc or Eberg along w the 4 bolt to 2 bolt adapter plate. On your M/C choice just check the inside of the rear piston recess that it has the shallow groove for the neoprene retainer (that you have) to lock into as opposed to the smooth tapered barrel like the inside of a thimble used on PB apps (Doc/Eberg wont mistake that but parts houses can). Can get a snip of vac hose the same length as the groove in the end of the pushrod if you need a new one. Bench bleed the M/C 1st EDIT not sure on the prop valve if needs changing, Doc would know
Last edited by RapidRobert; 04/28/11 09:17 AM.
