Quote:
You are correct...Center is NSS and two outside terminals are back-up..But you have it backwards at the other end of the switch...Plastic plunger operates the NSS and the pin activates the back-up lights..I'd make sure the shifter linkage is properly adjusted first thing...
sorry but this is incorrect the center metal pin on the inside is what grounds to the VB creating the ground that runs to the starter sol.
70 duster full chassis super pro 416 CNC Indybrock heads 727 w/brake
best so far 1.212 60 6.219 in 1/8 at 110.88 9.768 at 137.81 1/4
| 
