Priming with a drill how many lbs?

Print Thread

Re: Priming with a drill how many lbs? [Re: drumcat] #967897 04/06/11 06:04 PM 04/06/11 06:04 PM
Joined: Jul 2008 Posts: 30,533 Florida STAYcation dOc ! The village idiot's idiot
dOc ! The village idiot's idiot Joined: Jul 2008 Posts: 30,533 Florida STAYcation	An 18.5 should have some grunt. But the better combo would be some-sort of a 1/2" corded drill. EITHER way should get you good priming. Do you have an actual mech gauge on the car?

Entire Thread
Subject	Posted By	Posted
Priming with a drill how many lbs?	drumcat	04/06/11 09:48 PM
Re: Priming with a drill how many lbs?	dOc !	04/06/11 09:51 PM
Re: Priming with a drill how many lbs?	drumcat	04/06/11 09:57 PM
Re: Priming with a drill how many lbs?	dOc !	04/06/11 10:04 PM
Re: Priming with a drill how many lbs?	drumcat	04/06/11 10:07 PM
Re: Priming with a drill how many lbs?	Challenger 1	04/06/11 10:12 PM
Re: Priming with a drill how many lbs?	drumcat	04/06/11 10:30 PM
Re: Priming with a drill how many lbs?	boydsdodge	04/06/11 11:09 PM
Re: Priming with a drill how many lbs?	drumcat	04/06/11 11:55 PM
Re: Priming with a drill how many lbs?	Kern Dog	04/07/11 12:11 AM
Re: Priming with a drill how many lbs?	446acuda	04/06/11 10:28 PM
Re: Priming with a drill how many lbs?	AndyF	04/07/11 01:50 AM
Re: Priming with a drill how many lbs?	RapidRobert	04/07/11 03:10 AM
Re: Priming with a drill how many lbs?	AndyF	04/07/11 04:40 AM
Re: Priming with a drill how many lbs?	Mr.Yuck	04/07/11 01:20 PM
Re: Priming with a drill how many lbs?	70Cuda383	04/07/11 02:36 PM
Re: Priming with a drill how many lbs?	AndyF	04/07/11 03:29 PM
Re: Priming with a drill how many lbs?	U code RR	04/07/11 04:28 PM
Re: Priming with a drill how many lbs?	wvmarv	04/07/11 05:51 PM
Re: Priming with a drill how many lbs?	Kern Dog	04/07/11 06:41 PM
Re: Priming with a drill how many lbs?	Ramrod39	04/08/11 06:56 AM
Re: Priming with a drill how many lbs?	DART67GT	04/08/11 11:45 AM
Re: Priming with a drill how many lbs?	maximum entropy	04/07/11 06:46 PM
Re: Priming with a drill how many lbs?	wvmarv	04/07/11 05:56 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To