Ok so i put it up on jackstands just before and the bearing retainer is not cracked. The rings on the weight system of the DF are still in tact. It does move around, i can move it from one side to the other with my hand,but it looks as if when you depress the clutch the fingers on the PP center that weight system so it does not hit the TO bearing. Am i correct on this theroy?

heres what i have found on todays test ride. It seems like a 50/50 split that it makes noise or doesnt make noise. The noise its making sounds like a DRY bearing spinning at speed. This noise happens only when i depress the clutch. I can create the noise at a complete stop and more so when im coming to a stop and hold the clutch in and coast. I would suspect it to be a TO bearing but it only does it about 50% of the time i use the clutch. Everything is new. PP ,disc,flywheel,shift,rods, linkages,trans has new syncros,bearings.