Quote:

Quote:

Will need to know the specs on the cam and valve springs before anyone can make a recommendation.

Why would you need adjustable pushrods? I ran a lunati voodoo 60303 cam with stock rockers and stock pushrods.





Rule of thumb is HD stamped rockers are good for .5" lift. Perhaps a bit more on a moderate RPM stroker with moderate springs. It depends on the cam/spring combo.



x3 ..... save your money and actually do yourself and the VALVE SPRINGS a favor by using the stamped-steel ones.....

The stamped steel ones to a better job "oiling"(cooling) the VS's ...