If it truely IS a viper T-56 then yes it does have a speed sensor....Left side rear, 3 prong pigtail...this is a Hall Effect sensor


This isn`t going to be plug and play and I really don`t think you can even make it work for several reasons.
First: the Dak gets it`s speed sig obviously from the rear sensor, However the ABS module does the conversion for the signal and then sends it to the PCM.
Second: the ABS is looking for an inductive sensor and it`s corrosponding resistance and sinewave output for diagnostics, it will not be happy with a square wave from the T-56 sensor (there are ways around this)
Third: Without actually seeing the tone wheels and doing some simple calcs on the pulses per rev, it is just a guess but if it is way different the ABS will probably not be able to go far enough with the difference (it has a very limited range)


Put the tone ring back on the rear...And by the way, it dosen`t go on the Ring gear, it is pressed on the carrier and is VERY easy to do.


Just my

Rick