PRW rockers the good the bad and the ugly

Print Thread

PRW rockers the good the bad and the ugly #941084 03/02/11 02:06 AM 03/02/11 02:06 AM
Joined: Feb 2005 Posts: 320 PA W w7smallblock OP enthusiast
w7smallblock OP enthusiast W Joined: Feb 2005 Posts: 320 PA	PLEASE DO NOT RESPOND TO THIS POST IF YOU PERSONALLY HAVE NO!!! EXPERIENCE WITH THESE ROCKERS, THANK YOU NOW FOR THE ? I'm looking at the prw 1.6 smallblock stainless rockers has anyone used them if so you're thoughts. This is for a BUDGET 408 with about 130-140 seat pressure and 330-350 open. Has anyone checked to see if the rocker ratio is close to advertised. Thanks for your time, Jim Last edited by w7smallblock; 03/02/11 02:09 AM.

Entire Thread
Subject	Posted By	Posted
PRW rockers the good the bad and the ugly	w7smallblock	03/02/11 06:06 AM
Re: PRW rockers the good the bad and the ugly	AndyF	03/02/11 06:29 AM
Re: PRW rockers the good the bad and the ugly	Canuck	03/02/11 07:02 AM
Re: PRW rockers the good the bad and the ugly	goldmember	03/02/11 07:09 AM
Re: PRW rockers the good the bad and the ugly	mopster	03/02/11 06:09 PM
Re: PRW rockers the good the bad and the ugly	challengermike	03/02/11 11:45 PM
Re: PRW rockers the good the bad and the ugly	w7smallblock	03/03/11 04:25 PM

Hop To