We used a shaker style AMD hood on a '70 'Cuda that we did a complete restoration on. The fit was very, very close but not "perfect" along the fender edges. I did some minor tweaking to get it closer, but that was the extent of it. I also had to add and/or enlarge the front seal clip holes. You will also want to use the reproduction ring. Our original did not fit the AMD hood as good as the repro.
All in all, I found it to be a very nice part and a much better option to fixing the owner's collision damaged original shaker hood.

FWIW, this same car (B5 440-6/auto.) was a last minute entry in the OE Judging at Mopar Nats. (not Carlisle as I originally posted/thx. Scott) in 2010. It lost a few points for some of the body panel gaps being too good!

Steve

www.clarkclassic.com