Quote:

Quote:

Hi Barnabas, I measured up the power window holes on my 70 E body project today:

Drivers pillar and passenger pillar are 1.5" and the drivers and pass door are 2.0".




Did you make those holes yourself? I'm thinking they should each be about 1/8 inch smaller so that the grommet fits tight and doesn't fall out.

Tav



These measurements are from my original 70 340 E body with factory power windows.
The holes in the pillars measure about 1.510" and about 2.065" on the doors, and the factory grommets fit snug.