Quote:

Mike,

Thanks for the info. I'll take some measurements and swing by the local Harbor Freight monday.

Otherwise, I'll use an old left over bodymount disc and drill it for dowels and put a bolt through the center. Weld & grind a bit and use a stack-up of extensions down the axle tube. FSM says 75 lbs/ft IIRC.





75 lbs/ft. No , no no! Those adjusters are to move the carrier back and forth to help get proper ring and pinion gear clearence.

Once thats found, the adjusters are tightend to give the bearing preload to prevent any slop.

Its tightend like a wheel bearing, turn them in untill all slop is gone and with a little extra turn. No way crank them both to 75 ft/lbs. mike