Quote:

---

i will have to get the numbers on the head for you and get back to you, i know they are 906 heads, thats all i know
thanks [/quote

It depends on what you want to do with it but with the 906 heads, it should run very strong in an every day street machine. Unless you expect to build an 11 second race car, I think it's likely to be a very good motor just with decent intake, ignition and the right carburation. With today's gas, you don't need 10.1:1 compression but my experience with the 68 and up blocks is that they will not generally have .100 deck height. The 67 blocks did because they had to keep the compression down with the small combustion chambers in the 67 and earlier heads. I would keep it in a controlled climate if possible but it won't rust too easily. It would be good if you could paint it, spray down the bare steel with some Mopar MP50 or equal and put a HD leaf bag over it to seal it up. It should be fine for months.