Quote:

Make sure you have a pipe cutter and mig welder ready for the modifications...Used summit's kit on a 73 Road Runner and the pipes going over the axle were way off.... ...They try to span too many years on the B body kit and unfortunately the 73-74s should'nt be on the list for the exhaust to fit....



Just an update- Installed the B-body 3" kit on a 1970 and it fit like ass. The passenger side was mostly ok but had to cut down the collector adapter to about 2" so the pipe would pass through the trans tunnel proper.

The drivers side was a train wreck. The front pipe when everything in the rear was lined up placed the collector in the middle of the torsion bar! I had to cut the drivers pipe in two places and flip it 180 degrees for everything to line up as it should.

If I didn't have a welder and a chop saw it would have been real ugly.

On the other hand, the tailpipes fit fairly well and the mufflers sound good.