Goldmember and myself went to the track tonight with truck to see what it would run on the new eddy performer RPM NOS plate we put on a few weeks ago. I tried about 9 weeks ago to spray it out of the hole with a 175 hp .078 nitrous jet and a .078 fuel jet. and it broke an axle. I tried it tonight thru the 1/8 mile and it spun hitting it about a sec into the run.
R/T .060
60' 1.724
330 4.632
1/8 7.092
MPH 99.57

I tried it again later and ran it out all the way thru the 1/4

R/T .017
60' 1.806
330 4.72
1/8 7.179
MPH 99.91
1000 9.314
1/4 11.143
MPH 122.81
It spun again and kicked the serpentine belt off and hot quite hot Im pretty happy with the way it ran and I think it might have a 10 in it with a decent 60' time.

Last edited by mphsmitch; 09/15/10 11:56 PM.