Quote:

is it possible that the relays are wired to a normally closed circuit, which powered they would be then open or "off"?
Other than that just use your volt meter and check continuity between the ground and the relay too check to see if its already grounded?


DING, DING, DING, DING...... I think we have a winner. Just for grins I went back out and simply reversed the positions of the wires on each toggle and now everything SEEMS to be working normally. I still cannot wrap my head around why, but, for now its working. The only "problem" is that with no power lead going to the switches, the lighted switches...arent. Didnt think about that, so, its either leave it like it is, or rewire it the way I used to do it and have the lighted switches. Oh well, thanks guys for throwing some brain cells at this.
Ken.