i just cant figure this out, my basicly stock 318 dripps alot of oil around the plate that the oilfilter seals against:(
this motor never had any problems with oil leaks before i took it out of the car some years ago, the only thing i have done to it is that the heads have been of it and rockers have been of the heads to have a look at the cylinders and see how the rockers and shaft was doing, and the oilfilterplate was borrowed and put on the 340 that took its place.. when putting the 318 in the car again i just put it all togheter and i installed another oilfilterplate with a new gasket i had lying around and now the thing just wont seal..
where did i do wrong? i just cant get it...
any sugestions?