Here is a couple of quick questions on a Dana 60 rear end. I am getting ready to set the narowed Dana 60 housing in the car. I am just going to clamp things together, with the spring perches loose, until I am ready to fully assemble the rear. The spring perches are big time rattle- loose. Check the tube diameter, and it is 2-3/4", not 3". Anyone ever seen this? Or, did I just figure out why it was such a bargin?
Also, what is the corrrect size of the stud portion of the center bolt in the SS springs supposed to be. I have about 1/8" clearance in the M.P. spring perch and the stud diameter.
Thanks for any information.
John