Quote:

Yes to the switch, only 1 feed to the middle terminal from the flasher, feed for the brake light from the fusepanel to the brake switch to the brake lights. when the turn signal on ok brakes on ok but when both on I have front brake lights on not cool





so in the rear you have 1 bulb for each side,
and at some point you have 2 wires hooked together to one of the tail light wires(1 from the stop light switch and 1 from the toggle for turn,yes?)...

I don't know how you could wire it with just 1 bulb and "NOT" get feedback, that is why I suggest having a separate bulb in the tail light for the brake light.

then the 1 bulb will be for running lights and turn and the other bulb is only for brake

do you have room in the tail light to put a second bulb??? thats how I would do it, Ron....