Quote: i could be mistaken Rick but i dont think either header will allow for clutch hardware/z-bars.. a friend was just showing me his 69 dart 4spd he used a hydralic throwout bearing.. some kit thats out there...fwiw...
i suspect your going to need to modify the wheel house and strech the wheel opening... i know on a baracuda the rear wells are tiney... fwiw.. cheers cheapst.
Not sure on the Doug's, but TTI has a (NEW)chassis exit set for 64-65's that is (supposed) to fit all steering types and 4-speed 10.5 bell-housing(with zbar)they are 1 5/8" stepped to 1 3/4" merged to 3" collector which would be perfect for my combo
They do require a RobbMc Performance Mini Starter part # 2005 $299.99 But I do hear they are a nice piece
They also offer a full 3" exhaust to the rear bumper that is sweet.....gonna have to save up some coins
Only going to run a 27"tire and it will fit without modification....actually from my measuring a 30" tire will fit, just limited on width with the stock spring and no minitub
But I do hear they are a nice piece 
