tranny lines and firing up motor

Print Thread

Re: tranny lines and firing up motor [Re: Locomotion] #739376 07/04/10 10:06 AM 07/04/10 10:06 AM
Joined: Dec 2007 Posts: 387 n/w, PA D demonH1B enthusiast
demonH1B enthusiast D Joined: Dec 2007 Posts: 387 n/w, PA	The cooler has 30 psi max. from the trans. lube circuit. Gas hose & screw clamps will work fine, see it alot on a permanent basis on drivers.

Entire Thread
Subject	Posted By	Posted
tranny lines and firing up motor	hemi68charger	07/03/10 04:16 PM
Re: tranny lines and firing up motor	dOc …	07/03/10 04:19 PM
Re: tranny lines and firing up motor	451Mopar	07/03/10 04:25 PM
Re: tranny lines and firing up motor	Locomotion	07/03/10 04:27 PM
Re: tranny lines and firing up motor	okie	07/03/10 06:36 PM
Re: tranny lines and firing up motor	John_Kunkel	07/03/10 06:59 PM
Re: tranny lines and firing up motor	chache876	07/03/10 08:35 PM
Re: tranny lines and firing up motor	John_Kunkel	07/03/10 09:57 PM
Re: tranny lines and firing up motor	chache876	07/03/10 10:12 PM
Re: tranny lines and firing up motor	demonH1B	07/04/10 02:06 PM

Hop To