porting and valve questions about 318 heads

Print Thread

Re: porting and valve questions about 318 heads [Re: HotRodDave] #738408 07/03/10 09:51 PM 07/03/10 09:51 PM
Joined: Oct 2004 Posts: 91 florida rxod OP member
rxod OP member Joined: Oct 2004 Posts: 91 florida	thanks hotroddave, I think I will go the 302 head route if I can find some locally. Found a good article on porting various small block heads. Chrysler small block cylinder heads casting differences and porting

Entire Thread
Subject	Posted By	Posted
porting and valve questions about 318 heads	rxod	07/02/10 08:21 AM
Re: porting and valve questions about 318 heads	scratchnfotraction	07/02/10 12:10 PM
Re: porting and valve questions about 318 heads	rxod	07/02/10 07:03 PM
Re: porting and valve questions about 318 heads	dulcich	07/03/10 01:39 AM
Re: porting and valve questions about 318 heads	70AARcuda	07/03/10 05:31 AM
Re: porting and valve questions about 318 heads	HotRodDave	07/03/10 06:49 PM
Re: porting and valve questions about 318 heads	rxod	07/04/10 01:51 AM
Re: porting and valve questions about 318 heads	patrick	07/05/10 01:53 PM
Re: porting and valve questions about 318 heads	rxod	07/04/10 01:46 AM

Hop To