318/340 Intake Manifold Install... - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 318/340 Intake Manifold Install...

Print Thread

Re: 318/340 Intake Manifold Install... [Re: cuda_tim] #678026 04/23/10 10:02 AM 04/23/10 10:02 AM
Joined: Jan 2003 Posts: 25,200 Upper Midwest M MoparforLife Too Many Posts
MoparforLife Too Many Posts M Joined: Jan 2003 Posts: 25,200 Upper Midwest	If you use the intake gasket with the end pieces the tabs go through the little holes in the end pieces to hold in place. If you use silicone you can clip them off or leave them the intake should seal either way..

Entire Thread
Subject	Posted By	Posted
318/340 Intake Manifold Install...	cuda_tim	04/23/10 01:51 PM
Re: 318/340 Intake Manifold Install...	MoparforLife	04/23/10 02:02 PM
Re: 318/340 Intake Manifold Install...	cuda_tim	04/23/10 02:09 PM
Re: 318/340 Intake Manifold Install...	RapidRobert	04/23/10 08:21 PM
Re: 318/340 Intake Manifold Install...	scratchnfotraction	04/23/10 08:47 PM
Re: 318/340 Intake Manifold Install...	RapidRobert	04/23/10 08:51 PM
Re: 318/340 Intake Manifold Install...	volaredon	04/26/10 12:10 AM
Re: 318/340 Intake Manifold Install...	5thAve	04/26/10 06:28 AM
Re: 318/340 Intake Manifold Install...	scratchnfotraction	04/26/10 12:22 PM
Re: 318/340 Intake Manifold Install...	Sixpak	04/26/10 03:39 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1