Quote:

Im running 28x11.5 QTP's and want to move up to 29x11.5 QTP's. I measured it today,I have 1 1/2" in the front and 1 5/8" in the back of the 1/4.





Assuming that the relative difference in diameter is accurate(and it might not be), that would leave 1" at the front and 1 1/8" at the back. No problem unless your rim width is way to narrow. Also keep in mind that the spring change "might" relocate the rearend slightly.

If your worried about it then just bend the flanges slightly so that if the tire hits it won't hit a sharp edge.

Last edited by GomangoCuda; 04/22/10 07:01 AM.

In theory, there is no difference between theory and practice. In practice, there is.