|
Re: Help: Need hardware for 71 b-body front pin calipers
[Re: autoxcuda]
#66045
05/30/08 12:02 PM
05/30/08 12:02 PM
|
Joined: Sep 2006
Posts: 1,164 Los Angeles, CA
JF_Moparts
OP
super stock
|
OP
super stock
Joined: Sep 2006
Posts: 1,164
Los Angeles, CA
|
Quote:
Which pins did you get? Did you get new rubber bushings. If they are the pins with the 1/2 socket, those don't take retaining clips. And you can leave out the anti rattle spring too.
The OE style 3/8" socket pins and retaining clips are repro'd by Bill Rollik. Maybe other carry them as well. He sells on ebay IIRC. Or google him.
So far I haven't bought the pins, I just located them on Kragen's auto web site.
I just spoke with Bill and he seemed to have all the original style parts, but they were fairly expensive. I'm sure they're worth it for those wanting a 100% original car.
Is there any difference, functionally, between the 3/8 and the 1/2? I mean, will one fit better or work better than the other? I just care about having my brakes work as opposed to using all original parts.
Thanks.
Jim
|
|
|
|
|
|