sleeve a 318 and bore to 340 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech sleeve a 318 and bore to 340

Print Thread

Re: sleeve a 318 and bore to 340 [Re: rebel] #650776 03/25/10 02:04 PM 03/25/10 02:04 PM
Joined: Jul 2006 Posts: 282 Stockholm,SWEDEN T The Nutcracker enthusiast
The Nutcracker enthusiast T Joined: Jul 2006 Posts: 282 Stockholm,SWEDEN	My 340 was sleeved on al 8 when i bought it, Makes stable cylinderwalls. I like the idea of a sleeved 318 stroker, tell people its a stock 318! -70 Cuda,-65 Valiant,-66 Valiant,-62 FED

Entire Thread
Subject	Posted By	Posted
sleeve a 318 and bore to 340	alpha727	03/25/10 10:46 AM
Re: sleeve a 318 and bore to 340	racincuda	03/25/10 11:53 AM
Re: sleeve a 318 and bore to 340	bigsbigelow	03/25/10 12:17 PM
Re: sleeve a 318 and bore to 340	Scamp408	03/25/10 12:42 PM
Re: sleeve a 318 and bore to 340	70Cuda383	03/25/10 03:18 PM
Re: sleeve a 318 and bore to 340	moper	03/25/10 03:35 PM
Re: sleeve a 318 and bore to 340	5spdcuda	03/25/10 03:44 PM
Re: sleeve a 318 and bore to 340	Cab_Burge	03/25/10 05:21 PM
Re: sleeve a 318 and bore to 340	rebel	03/25/10 05:55 PM
Re: sleeve a 318 and bore to 340	The Nutcracker	03/25/10 06:04 PM
Re: sleeve a 318 and bore to 340	rickstershemi	03/25/10 10:14 PM
Re: sleeve a 318 and bore to 340	domingo	03/26/10 12:50 AM
Re: sleeve a 318 and bore to 340	340_Dart	03/26/10 03:39 AM
Re: sleeve a 318 and bore to 340	emarine01	03/26/10 02:18 PM
Re: sleeve a 318 and bore to 340	moper	03/26/10 03:39 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1