Main bearing clearance problem

Print Thread

Re: Main bearing clearance problem [Re: DaveDudek] #635905 03/10/10 07:06 PM 03/10/10 07:06 PM
Joined: Aug 2009 Posts: 2,049 Mooresburg, Tn ' '72CudaRacer OP top fuel
'72CudaRacer OP top fuel ' Joined: Aug 2009 Posts: 2,049 Mooresburg, Tn	Dave, Its a drag race only engine (440) and a solid cam. If it was a street engine, I let'er eat. I just think its too tight for a bracket engine.

Entire Thread
Subject	Posted By	Posted
Main bearing clearance problem	'72CudaRacer	03/10/10 10:46 PM
Re: Main bearing clearance problem	jamesc	03/10/10 10:51 PM
Re: Main bearing clearance problem	'72CudaRacer	03/10/10 11:04 PM
Re: Main bearing clearance problem	DaveDudek	03/10/10 10:58 PM
Re: Main bearing clearance problem	'72CudaRacer	03/10/10 11:06 PM
Re: Main bearing clearance problem	70Cuda383	03/10/10 11:06 PM
Re: Main bearing clearance problem	MoparforLife	03/10/10 11:42 PM
Re: Main bearing clearance problem	CompWedgeEngines	03/11/10 01:26 AM
Re: Main bearing clearance problem	Bob_Coomer	03/11/10 02:36 AM
Re: Main bearing clearance problem	'72CudaRacer	03/11/10 02:44 AM
Re: Main bearing clearance problem	'72CudaRacer	03/11/10 03:05 AM
Re: Main bearing clearance problem	CompWedgeEngines	03/11/10 03:43 AM

Hop To