Quote:


Have you rebuilt a TQ yourself before?

If you 'double stack' or put the wrong o-rings (too thick) in the wells you will effectively raise the top causing all kinds of problems.

Is the float level set correct?





Yes I have rebuilt TQs before. with great results. Thats why I wasn't afraid at all to tear into these two. but neither "turned out" and seem to be having the same problems.
and, yes the float is set correct. I even re-tore the 1st one apart to reset them, before I ever bolted it on, 'cause I got 2 different sets of spec's and reset that one, after talking to DemonSizzler, from my original setup.