I am in the middle of putting this new combination together and I thought I would see what everyone thinks. The motor is a .030 over 383 with a muscle motors 489 stroker kit. It has 10:1 compression, 440 source stealth aluminium heads with crane adjustable 1.5 rocker arms, any suggestions for camshaft and carbeurator. I do have a 750cfm double pumper, but I am debating if that might be to small. I called hughes racing about a cam and they suggested an HEH4246BL which has .555/.569 lift and 242/246 duration at .050" installed at 105 degrees. What do you guys think about the carb and cam? 727tf with full manual valve body, converter suggestions are desperately needed! 8 3/4 with several options for rears. I have a 489 case with a full spool and 5.13gears( I was going to use these for 1/8th mile strips). I have a 742 case with a full spool that I was going to put 4.10 in for 1/4 mile tracks. And finally I have a 741 case with a lock-rite and 3.23 gears for cruising and street driving. The car has 29 inch tires and weighs 4400lbs w/driver. Any and all opinions are welcome seeing as this is my first build, and I am trying to make sure I get everything matched correctly for optimum performance. Thanks Moparts.