Quote:

John,also there is a part missing on 99% of the Hemi carbs.Unless you have a 100% original,unmolested carb you will never know it was supposed to be there.This small bracket was attached to the housing and bent around the tube to keep the heat tube from slipping out of the cap.Used as far back to 1962 on the 300H.


Next,"tags" !




Here's of an example from a set of original 1962 413 carbs (inline 3258's). The tag on this set was extremely clean so I used it to make a pattern and reproduce them. Any of my previous customers who need one are welcome to a free one.


4479134-Chokestrapa.jpg (55 downloads)