Cam Break In Procedures... - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Cam Break In Procedures...

Print Thread

Re: Cam Break In Procedures... [Re: vttm] #615803 02/19/10 03:13 PM 02/19/10 03:13 PM
Joined: Jan 2005 Posts: 45 Forest Grove,Oregon B beepbeepdon member
beepbeepdon member B Joined: Jan 2005 Posts: 45 Forest Grove,Oregon	Give Dave Hughes a call @ Hughes Engines 309.745.9558. He and his staff have really helped me. I bought most of my config from him including a.614" solid flat tappet using Hughes 1.6 roller rocker setup.He has a break-in oil as well.

Entire Thread
Subject	Posted By	Posted
Cam Break In Procedures...	vttm	02/17/10 08:10 PM
Re: Cam Break In Procedures...	ajcasini	02/17/10 08:20 PM
Re: Cam Break In Procedures...	maximum entropy	02/17/10 08:30 PM
Re: Cam Break In Procedures...	vttm	02/18/10 12:24 AM
Re: Cam Break In Procedures...	602heavy	02/18/10 12:36 AM
Re: Cam Break In Procedures...	Crizila	02/19/10 09:32 PM
Re: Cam Break In Procedures...	440forPOWER	02/21/10 07:09 PM
Re: Cam Break In Procedures...	Mr71Bee	02/18/10 01:29 AM
Re: Cam Break In Procedures...	dustergirl340	02/19/10 07:20 PM
Re: Cam Break In Procedures...	BELVEDERE67	02/19/10 07:42 PM
Re: Cam Break In Procedures...	atoetly	02/19/10 07:48 PM
Re: Cam Break In Procedures...	Georg	02/19/10 07:52 PM
Re: Cam Break In Procedures...	BELVEDERE67	02/19/10 08:23 PM
Re: Cam Break In Procedures...	vttm	02/19/10 08:37 PM
Re: Cam Break In Procedures...	65signet	02/19/10 09:17 PM
Re: Cam Break In Procedures...	atoetly	02/20/10 03:45 PM
Re: Cam Break In Procedures...	vttm	02/20/10 04:15 PM
Re: Cam Break In Procedures...	atoetly	02/20/10 04:49 PM
Re: Cam Break In Procedures...	440Jim	02/20/10 08:45 PM
Re: Cam Break In Procedures...	vttm	02/21/10 05:26 PM
Re: Cam Break In Procedures...	440Jim	02/21/10 07:49 PM
Re: Cam Break In Procedures...	atoetly	02/21/10 09:22 PM
Re: Cam Break In Procedures...	vttm	02/19/10 07:51 PM
Re: Cam Break In Procedures...	beepbeepdon	02/19/10 07:13 PM
Re: Cam Break In Procedures...	440Jim	02/19/10 08:12 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1