Quote:
Goody:
-How much clearance do you have above the rear tire (wheel well)? You definitely got more arch in the rear leafs than I do
-Did you have to trim the rear wheel well lips?
Glenn C
They are super stock springs with lowering blocks on them (used to like the raked look). The height of the springs does pretty much nothing for me, the tire will stuff very far into the well.
The lip was rolled lightly from my previous tires, however there is my tire to 1/4 panel clearance. These were all taken a few years ago, so I'm a bit rusty on it things were fitting. Plenty of room for the stock lip all the way around.
Again with using a spacer you can really fine tune the tire in the well. As you could see in the earlier picture I had room to stick it closer to the spring if i wanted to
| 
