Well, I finally went through all the spare parts that came over in the container with John's Daytona, and thought I would post a few pics for those that might be a little curious about the Aussie stuff for what ever reason

Here is an Aussie K frame for the hemi...as you can see, no steering box mounts! (it mounts to the K frame, the engine mounts are tied to it with a piece of wire on the corner)


Here are a couple of pics of what a 265 hemi short engine looks like..



A hemi starter motor...looks sort of like a "real" hemi one huh?



Here are some intake/exhaust manifolds for a standard 2bbl set-up... note in the second one the cool dual outlet exhaust manifold !



Here is a pic of a modified small block 904 case to suit the hemi, as you can see, thier bolt patterns are close, you just have to add a few holes..


And finally, a head shot..


Hope these might have been a teenie bit of interest to a few folks..just something different! Oh, and I got some spare door handles and such, and the part #'s all start with an "A", must be to denote Australian maybe?