Quote:

Assuming a 73 uses the same length shaft as a 70-71, it should be 43.60" for a BB with 8 3/4" rear-end. Measured from the center of the u-joints.









Correct, the Cuda's WB is the same thru the years, as is K frame/engine position ......... I've seen dems listed also as 43.625 ......I measured twice with a tape measure and got 43.750,....an 1/8" difference, could be a "production tolerance"?....either way, as long as you have at least 1" of play when the suspenion squats you won't slam the the yoke in the tailshaft of the tranny

Mike

Last edited by DAYCLONA; 12/28/09 06:10 PM.