First Thanks for posting that

So if i read this right fo a 70 runner/s-bird

the K-member torque down to 150FP
the lower c-arm nut torque to 145FP
upper ball joint 100FP
lower ball joint 85FP

the only speck i needs is the two nut and bolts that hold the lower ball joint to the spindel

ok some fun info about the bird from the wing warriors,,,

are car is the 1,053 built and the 500th car to get built with a 6-pac... and we know where the bird that was built before ours,,,

kool !!!!

thanks