Well just an update:
I went to Milan and had a new best 60' at 1.39 and a couple 1.41 times. 1.44 was average at Norwalk CC event.

Ran a New N/A best of 10.14 and 10.17 at 132.35 on both passes.

Ran a New NOS best of 9.31 at 139 letting off because something wasn't right and missing.
Old NOS run was 9.39 at 144.54 and that was thru 2 gears only.
I have to look at all the time slips from Norwalk and Milan and compare #'s.

BAD NEWS is on my 2nd NOS pass something didn't feel right in the burnout box. It had a vibration as I was doing the burnout. (Didn't make the pass)
I got home and checked it out, passenger side #4 cyl wasn't showing the same heat in the pipes with temp gun.
Pulled the valve cover and I now have a pushrod shoved thru the top of my lifter. It is in there about 1/4" I believe and it is stuck Good.
Cam and everything else looks Good though so I will talk to Mike at Graham perf engines and see what my options are. Maybe I will race 1 more time yet, maybe I won't. Cross my fingers and Hope it all is Good to change parts and try again.

Later David

Last edited by His and Her 69's; 10/20/09 02:39 AM.