I am currently running a 496 low deck stroker in my 65 Belvedere, it runs 11.13 @ 125 in full street trim and with a 4 speed.

I was wondering if i could could a little better cam for my setup because it seems to lose power up top according to the dyno sheet, current setup:

4.25 Stroke
4.31 Bore
Indy 440EZ heads hand ported, flow 354 @ .500
Indy Low Deck Single Plane
1050 Dominator
12.7 : 1 compression
TTI 2 inch primary headers with no exhaust
4 speed with a 3.91 gear

Current cam is a comp solid roller with these specs:

.660 lift on the exhaust
.655 on the intake
282 duration @ .050 on the exhaust
281 on th eintake
110 LSA
and it is currently advanced 2 degrees and has been degreed for the motor.