Quote:

https://corporateportal.ppg.com/Refinish...CACHEHINT=Guest







Thanks for the link, unfortunately it appears to have zero information about Acrylic Enamel...

FWIW I've found info that confirms Urethane Reducer is ok to use.. So it appears I may have something else going on... The paint is dry to the touch in under five minutes.. We're talking a heavy wet coat not something being sprayed to dry... as it dries it's developing a haze as well.. It's flat & smooth, no orange peel but hazing over like it's a semi-gloss finish... must be a chemical issue.. I'm using DAR (Delstar Acrylic enamel) DXR80 (Urethane Hardener) & DT-870 (Urethane reducer) the temp is around 72 degrees... For the bottom & trunk as long as it's protected I don't really care but when It's time to spray the outside panels this needs to be fixed...