I'm hoping you guys can help me out. I've checked the clutch numerous times and I can't see anything wrong with the setup. I'm using the factory linkage setup. I have a 340 6 pack with 10.5 clutch set with the 3 fingers for the pressure plate. I can get the car to idle at 900rpms in neutral, but whenever I push the clutch in, the idle starts to drop by about 300 or so rpms, which causes the car to stall. What am I missing? The clutch starts to engage around half way off the floor, maybe a touch higher, but not close to the top...any help would be greatly appreciated.

Thanks