Quote:

I'd get a baseline, A compression test to see what your cyl pressure is. What total timing is w vac adv disconnected and at what rpm it maxes out at. What springs are in the dist. What do your plugs look like and how much vacuum at idle.



Good suggestion, I guess it can not hurt to do a compression test.

I have changed out the heavier dist spring, (that is what the kit suggested). Shoudl I have changed both?

I will do a base line on the carb as suggested.

I have spent some time adjusting the carb, and belive it is pretty close. But i will certinly go through all the suggestions and see what happens.

Jas