|
|
Re: Need Some Help Diagnosing a Problem
[Re: Lil Demon]
#373871
07/13/09 12:48 PM
07/13/09 12:48 PM
|
Joined: Mar 2006
Posts: 9,910
Eighty Four, PA
B G Racing
master
|
master
Joined: Mar 2006
Posts: 9,910
Eighty Four, PA
|
Quote:
Bob - I did have some leaking in the back carb. I pulled and cleaned the needle/seat and that seemed to correct the problem. But, now I'm wondering if it is intermittent.
It idles clean - but then when I put it in N or gear - the RPMs drop and it doesn't want to run. It almost feels dead and then it surges when I give it some pedal - almost like a really fat blower car.
I always shoot cleaner in my bleeds - but I think I'm going to pull everything apart and clean them out to make sure.
Sounds like a carb problem,blades not set correctly,(possiably bent)float levels,floats saturated(heavy)they should weigh between 11 and 15 grams.Dirt in the feul system,bleeding internally through the emulsion wells and circuts(porus meterblocks)leaky gaskets at the power valve or pv plugs,Warped housing???? 
|
|
|
|
|
|
|
