Quote:

---

Three steel lines run to the front of the car. One for the fuel pump, one for a return coming from the fuel separator on the engine/fuel pump to the sending unit and the vent line that goes from the rear vapor separator to the engine compartment and attaches to the breather cap in the valve cover.

---

Nice car! I'm not trying to put everything back to factory specs, Just want to make sure the tank is vented along with anything else that needs it. Engine is a 416 on pump gas.

Ok, (bare with me) The way I understand this is I'll need 2 more lines going to the front, one coming from the sending unit that goes to fuel separator. Is the separator a vented fuel filter ? The 2nd line goes from the rear vapor separator (pic in my first post) to the breather cap in the vc ? I dont remember this line and is it necessary ? Is it a vent for the vc ?
So the 4 lines in the front of the tank go to the rear separator in any particular order ?