Hemi piston compression height question

Print Thread

Re: Hemi piston compression height question [Re: Keith Black®] #352445 06/20/09 10:30 AM 06/20/09 10:30 AM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate master
Hemi Allstate master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	"Does anyone know if the Piston compression height (calculated to be 1.375" puts the pin into the oil ring land ..?" All I can tell you for sure is, that my 4.50" stroke with 7.100 rods put the pin in the oil ring land and requires a support rail. This is not a problem. Mark 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Entire Thread
Subject	Posted By	Posted
Hemi piston compression height question	Keith Black®	06/20/09 11:14 AM
Re: Hemi piston compression height question	Hemi Allstate	06/20/09 02:30 PM
Re: Hemi piston compression height question	SSAAHemiFan	06/20/09 04:35 PM
Re: Hemi piston compression height question	Bob_Coomer	06/20/09 06:44 PM
Re: Hemi piston compression height question	Keith Black®	06/20/09 10:59 PM
Re: Hemi piston compression height question	turbobitt	06/21/09 03:08 AM
Re: Hemi piston compression height question	Hemi Allstate	06/21/09 04:43 AM
Re: Hemi piston compression height question	turbobitt	06/21/09 09:37 PM

Hop To