Quote:
Did you check the needle movement yet?
They move up and down freely, I just don't know if they are being drawn down by vacuum or not. I will check that tonight.
Quote:
Have you adjusted the needle height?
No, but it was running fine before, so the height should be okay.
Quote:
Do you know who rebuilt your carb and what size needles used?
I rebuilt it myself. The needles had "2127" on them. It was running fine before with them so I can rule out the needles themselfs. Also it still drives fine, the problem is only at idle.
No longer taking $h!t from anyone!
| 
