Quote:
What is the ARP bolts part number so that I may order them also?
I was going to dig in my misc. box of bolts, but figured that this calls for some good high grade hardware which I may not have in that length.
Visually regretful, I am running a GM 200 amp 1 wire alternator which has served my purpose for some time now. When Mopar creates a 200 amp 1 wire, I'll switch over again.
Here are some pictures:
ARP stainless 12-point 5/16" x 18 tpi, 1.50" long.
they are a bit long, but I figured it would be easier to grind a bit off than use bolts that are too short. I measured the depth of the bolt surface on the pulley to the timing chain cover using my vernier calipers and the distance was around 1.625" so there should be no problem, and when I add the washer (or two) under the bolt head there should be plenty of clearance for the timing chain cover. The ARP part number is 612-1500. I just with they sold them in six packs, I had to buy two cards with 5 bolts each.
Last edited by 451Mopar; 06/25/09 03:18 AM.
