Quote:

Guys they are not pins.
The holes are there so that nylon could be injected in the recessed area.
See below.
Jules


I drilled out the remainder of the injected nylon in the 4 holes on the inner shaft and found some 1/8" nylon screws and shaved the thread off and pushed them in the hole and cut them off leaving them a little long and hammered them home and filed off the excess with a file. Will this work?


My car 74 Duster mild 360/904/3.91 13.44/101.54 Son's car 75 Dart Sport 318/904/4.10 looking for a 360 or 408 2004 Dodge Ram 1500 Laramie 5.7 2010 Dodge Challenger R/T Classic B-5 6 speed 2010 Jeep SRT8 for the little wife