well I finally got the tube bender back to my house and picked up the rollbar tubing and started the rollcage
here are a few progress pics of what I got done this week. Ron...

here is the first fitting of the main bar:


this picture is what the front bars will look like:


here is the main bar and the back bar in place:


fitted back into the cab:


here is where I cut the cab to move it back 3":


from the pass side with the bar tacked in place:


I decieded to put in a rear brace bar:


back bars setting in place:


lower rear bars mount area, right to the shock mounts:


upper area, I have to wait to weld these bars in till I get the back of the cab done and make the front bars, then finish all the welds and finish the chop top:


and here is a pic of the filler piece for the added 3" to the cab: